Difference between revisions of "NETWORK (procedures)"

From OCE Space Simulation
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
==0.4 Network and Software Procedures==
+
{{Procedure}}
===0.4.1 Preparing the Network===
+
'''NETWORK''' is the Network Administrator, who ensures proper sync between Mission Control and Habitat software. NETWORK is a {{procsref|Common Positions|common staff position}}, and as such is found in both [[Mission Control]] and in the Habitat.
  
 +
==Preparing the Network==
 +
''These tasks should be accomplished by a Mission Control NETWORK officer prior to any {{procsref|Missions|mission}}
 
*Create a list of which computer will run which software during the Mission
 
*Create a list of which computer will run which software during the Mission
 
**e.g. [[List of Computers#Mission Control Computers|Grissom]] = MC EECOM
 
**e.g. [[List of Computers#Mission Control Computers|Grissom]] = MC EECOM
Line 9: Line 11:
 
**Note that the "drive letter" for this example is "X"
 
**Note that the "drive letter" for this example is "X"
 
*Click each drive to activate it
 
*Click each drive to activate it
*On Fu's desktop, start SERVER and proceed with [[Network and Software Procedures#0.4.2 SERVER]]
+
*On Fu's desktop, start SERVER and proceed with {{procsref|NETWORK|SERVER|SERVER Procedures}}
  
===0.4.2 SERVER===
+
===SERVER===
  
 
*You will be prompted to give the letter corresponding to several mapped network drives
 
*You will be prompted to give the letter corresponding to several mapped network drives
Line 25: Line 27:
 
** If the drive has not been activated, activate it by double clicking it.
 
** If the drive has not been activated, activate it by double clicking it.
  
===0.4.3 Software Version===
+
==Software==
 
+
===Version===
 
The current version of the software is '''[[ORBIT|ORBIT5S]]'''.
 
The current version of the software is '''[[ORBIT|ORBIT5S]]'''.
  
===0.4.4 Software Locations===
+
===Location===
 
+
 
A full set of software should be available at C:\Orbit\ on all [[Spacesim]] [[List of Computers|PCs]].
 
A full set of software should be available at C:\Orbit\ on all [[Spacesim]] [[List of Computers|PCs]].
  
 
Alternatively, the software can be downloaded from [[Dr. Magwood]]'s [http://www.lisgar.net/magwood/space.htm Website]
 
Alternatively, the software can be downloaded from [[Dr. Magwood]]'s [http://www.lisgar.net/magwood/space.htm Website]
  
====Troubleshooting====
+
===Troubleshooting===
 
+
 
;If a full set of software is not found on a single PC at Spacesim
 
;If a full set of software is not found on a single PC at Spacesim
 
*Notify the [[Engineering Commander]]
 
*Notify the [[Engineering Commander]]
Line 49: Line 49:
 
*Copy the full set to C:\Orbit\ on each PC over the network.
 
*Copy the full set to C:\Orbit\ on each PC over the network.
  
===0.4.5 Software Set===
+
===Software Set===
  
 
The following is a list of all programs contained in the current version of the Software along with their associated station.
 
The following is a list of all programs contained in the current version of the Software along with their associated station.
Line 64: Line 64:
 
|-
 
|-
 
|}
 
|}
 
{{Procedure|PrevTopic=Training Mission Procedures|NextTopic=Procedures Table of Contents#Chapter 1: Mission Control Procedures}}
 

Latest revision as of 15:44, 26 April 2010


NETWORK is the Network Administrator, who ensures proper sync between Mission Control and Habitat software. NETWORK is a common staff position, and as such is found in both Mission Control and in the Habitat.

Preparing the Network

These tasks should be accomplished by a Mission Control NETWORK officer prior to any mission

  • Create a list of which computer will run which software during the Mission
  • On Fu in the Simulator Loft, find "My Network Places"
  • Verify that all computers to be used have a mapped network drive in this location
    • e.g. X:\Orbit on Cassini
    • Note that the "drive letter" for this example is "X"
  • Click each drive to activate it
  • On Fu's desktop, start SERVER and proceed with SERVER Procedures

SERVER

  • You will be prompted to give the letter corresponding to several mapped network drives
  • Press Enter to keep the previous setting

Troubleshooting

If any item in the list is Red
  • Identify which piece of software is at issue
  • Verify that the network drive that SERVER is using for that software is mapped to the correct computer
    • If SERVER is pointing to the incorrect drive, restart SERVER, and enter the correct drive letter when prompted
  • Verify that the mapped network drive is activated in My Network Places.
    • If the drive has not been activated, activate it by double clicking it.

Software

Version

The current version of the software is ORBIT5S.

Location

A full set of software should be available at C:\Orbit\ on all Spacesim PCs.

Alternatively, the software can be downloaded from Dr. Magwood's Website

Troubleshooting

If a full set of software is not found on a single PC at Spacesim
  • Notify the Engineering Commander
  • Preserve any save files
  • Delete the partial set
  • Copy a full set from another PC over the network
If a full set cannot be found on any PC at Spacesim

Software Set

The following is a list of all programs contained in the current version of the Software along with their associated station.

Station Program Name
AUXCOM Windows Net Meeting
MC EECOM EECOM.exe
Table incomplete