NETWORK (procedures)
From OCE Space Simulation
(Redirected from Network and Software Procedures)
| OCESS Procedures Manual |
|---|
| Table of Contents |
| Document Usage |
| Missions |
| Common Positions |
| Mission Control Staff |
| Habitat |
| Engineering |
| Flight (chapter) |
| Habitat Activities |
| Experiments |
| Emergency |
| Alpha Procedures |
NETWORK is the Network Administrator, who ensures proper sync between Mission Control and Habitat software. NETWORK is a common staff position, and as such is found in both Mission Control and in the Habitat.
Contents
Preparing the Network
These tasks should be accomplished by a Mission Control NETWORK officer prior to any mission
- Create a list of which computer will run which software during the Mission
- e.g. Grissom = MC EECOM
- On Fu in the Simulator Loft, find "My Network Places"
- Verify that all computers to be used have a mapped network drive in this location
- e.g. X:\Orbit on Cassini
- Note that the "drive letter" for this example is "X"
- Click each drive to activate it
- On Fu's desktop, start SERVER and proceed with SERVER Procedures
SERVER
- You will be prompted to give the letter corresponding to several mapped network drives
- Press Enter to keep the previous setting
Troubleshooting
- If any item in the list is Red
- Identify which piece of software is at issue
- Verify that the network drive that SERVER is using for that software is mapped to the correct computer
- If SERVER is pointing to the incorrect drive, restart SERVER, and enter the correct drive letter when prompted
- Verify that the mapped network drive is activated in My Network Places.
- If the drive has not been activated, activate it by double clicking it.
Software
Version
The current version of the software is ORBIT5S.
Location
A full set of software should be available at C:\Orbit\ on all Spacesim PCs.
Alternatively, the software can be downloaded from Dr. Magwood's Website
Troubleshooting
- If a full set of software is not found on a single PC at Spacesim
- Notify the Engineering Commander
- Preserve any save files
- Delete the partial set
- Copy a full set from another PC over the network
- If a full set cannot be found on any PC at Spacesim
- Notify the Engineering Commander
- Request Internet Access from the Admiral
- Download a full set from Dr. Magwood's Website
- Copy the full set to C:\Orbit\ on each PC over the network.
Software Set
The following is a list of all programs contained in the current version of the Software along with their associated station.
| Station | Program Name |
|---|---|
| AUXCOM | Windows Net Meeting |
| MC EECOM | EECOM.exe |
| Table incomplete |
