Difference between revisions of "NETWORK (procedures)"

Revision as of 16:53, 30 March 2010

Create a list of which computer will run which software during the Mission
- e.g. Grissom = MC EECOM
On Fu in the Simulator Loft, find My Network Places
Verify that all computers to be used have a mapped network drive in this location
Click each drive to activate it
On Fu's desktop, start SERVER and proceed with Network and Software Procedures#0.4.2 SERVER

You will be prompted to give the letter corresponding to several mapped network drives
Press Enter to keep the previous setting

If, after several seconds, any item in the list is Red

Identify which piece of software is at issue
Verify that the network drive that SERVER is using for that software is mapped to the correct computer
1. If SERVER is pointing to the incorrect drive, restart SERVER, and enter the correct drive letter when prompted
Verify that the mapped network drive is activated in My Network Places.
1. If the drive has not been activated, activate it by double clicking it.

@@ Line 19: / Line 19: @@
 # Identify which piece of software is at issue
 # Verify that the network drive that SERVER is using for that software is mapped to the correct computer
-# Verify that the mapped network drive is activated by clicking it in My Network Places
+## If SERVER is pointing to the incorrect drive, restart SERVER, and enter the correct drive letter when prompted
+# Verify that the mapped network drive is activated in My Network Places.
+## If the drive has not been activated, activate it by double clicking it.
 {{Procedure}}