Difference between revisions of "Planetary Launch Procedures"
From OCE Space Simulation
m (Fixed navbox) |
Jared Kelly (Talk | contribs) |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | ==== | + | ====Planetary Launch Procedure==== |
# Follow procedures in [[P1.5.3]] and [[P1.5.4.1]] steps 1 to 5 | # Follow procedures in [[P1.5.3]] and [[P1.5.4.1]] steps 1 to 5 | ||
# Select the current planet as reference and target object (see [[P1.5.4.1]]) | # Select the current planet as reference and target object (see [[P1.5.4.1]]) | ||
# Press F4 for automatic depart from target orientation. | # Press F4 for automatic depart from target orientation. | ||
# Press 'v' to activate approach velocity vector. | # Press 'v' to activate approach velocity vector. | ||
| − | # Increase thrust to exceed local gravity by at least 1 m/s/ | + | # Increase thrust to exceed local gravity by at least 1 m/s<sup>2</sup> and AYSE drive will lift off. |
# Adjust thrust to maintain the desired lift-off speed. | # Adjust thrust to maintain the desired lift-off speed. | ||
# Press F1 for manual orientation control. | # Press F1 for manual orientation control. | ||
| Line 16: | Line 16: | ||
#* Use slight thrust to restore correct approach velocity vector. | #* Use slight thrust to restore correct approach velocity vector. | ||
# Press F2 to restore automatic ccw orbit ref orientation. | # Press F2 to restore automatic ccw orbit ref orientation. | ||
| − | # If | + | # If V<sub>hab-ref</sub> is less than V<sub>o ref</sub>, use positive thrust to increase V<sub>hab-ref</sub>. |
| − | #* If | + | #* If V<sub>hab-ref</sub> is more than V<sub>o ref</sub>, use reverse thrust to decrease V<sub>hab-ref</sub>. |
# Stop engines. | # Stop engines. | ||
| − | + | [[Category:Procedures]] | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
Latest revision as of 17:00, 26 April 2013
Planetary Launch Procedure
- Follow procedures in P1.5.3 and P1.5.4.1 steps 1 to 5
- Select the current planet as reference and target object (see P1.5.4.1)
- Press F4 for automatic depart from target orientation.
- Press 'v' to activate approach velocity vector.
- Increase thrust to exceed local gravity by at least 1 m/s2 and AYSE drive will lift off.
- Adjust thrust to maintain the desired lift-off speed.
- Press F1 for manual orientation control.
- Gradually rotate the AYSE drive counter-clockwise until the orientation is perpendicular to the direction back to the planet.
- Press F2 for automatic ccw orbit ref orientation.
- If the approach velocity vector is pointing away from the planet:
- Press F3 for automatic approach to targ orientation.
- Use slight thrust to restore correct approach velocity vector.
- If the approach velocity vector is pointing towards the planet:
- Press F4 for automatic depart from ref orientation.
- Use slight thrust to restore correct approach velocity vector.
- Press F2 to restore automatic ccw orbit ref orientation.
- If Vhab-ref is less than Vo ref, use positive thrust to increase Vhab-ref.
- If Vhab-ref is more than Vo ref, use reverse thrust to decrease Vhab-ref.
- Stop engines.
