Difference between revisions of "Planetary Launch Procedures"

From OCE Space Simulation
Jump to: navigation, search
(Created)
 
 
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
====1.5.10 Planetary Launch Procedure====
+
====Planetary Launch Procedure====
−
# Follow procedures in [[1.5.3]] and [[1.5.4]] steps 1 to 5
+
# Follow procedures in [[P1.5.3]] and [[P1.5.4.1]] steps 1 to 5
−
# Select the current planet as reference and target object (see section 1.5.4)
+
# Select the current planet as reference and target object (see [[P1.5.4.1]])
 
# Press F4 for automatic depart from target orientation.
 
# Press F4 for automatic depart from target orientation.
 
# Press 'v' to activate approach velocity vector.
 
# Press 'v' to activate approach velocity vector.
−
# Increase thrust to exceed local gravity by at least 1 m/s/s and AYSE drive will lift off.
+
# Increase thrust to exceed local gravity by at least 1 m/s<sup>2</sup> and AYSE drive will lift off.
 
# Adjust thrust to maintain the desired lift-off speed.
 
# Adjust thrust to maintain the desired lift-off speed.
 
# Press F1 for manual orientation control.
 
# Press F1 for manual orientation control.
Line 16: Line 16:
 
#* Use slight thrust to restore correct approach velocity vector.
 
#* Use slight thrust to restore correct approach velocity vector.
 
# Press F2 to restore automatic ccw orbit ref orientation.
 
# Press F2 to restore automatic ccw orbit ref orientation.
−
# If Vhab-ref is less than Vo ref, use positive thrust to increase Vhab-ref.
+
# If V<sub>hab-ref</sub> is less than V<sub>o ref</sub>, use positive thrust to increase V<sub>hab-ref</sub>.
−
#* If Vhab-ref is more than Vo ref, use reverse thrust to decrease Vhab-ref.
+
#* If V<sub>hab-ref</sub> is more than V<sub>o ref</sub>, use reverse thrust to decrease V<sub>hab-ref</sub>.
 
# Stop engines.
 
# Stop engines.
  
−
 
+
[[Category:Procedures]]
−
{{Procedure|PrevTopic='''[[Orbital Maneuvering Procedures]]'''
+
−
|PrevNum=1.5.8
+
−
|ThisTopic='''Planetary Launch Procedures'''
+
−
|ThisNum=1.5.9
+
−
|NextTopic='''[[Habitat Drive Systems Procedures]]'''
+
−
|NextNum=1.5.10}}
+

Latest revision as of 17:00, 26 April 2013

Planetary Launch Procedure

  1. Follow procedures in P1.5.3 and P1.5.4.1 steps 1 to 5
  2. Select the current planet as reference and target object (see P1.5.4.1)
  3. Press F4 for automatic depart from target orientation.
  4. Press 'v' to activate approach velocity vector.
  5. Increase thrust to exceed local gravity by at least 1 m/s2 and AYSE drive will lift off.
  6. Adjust thrust to maintain the desired lift-off speed.
  7. Press F1 for manual orientation control.
  8. Gradually rotate the AYSE drive counter-clockwise until the orientation is perpendicular to the direction back to the planet.
  9. Press F2 for automatic ccw orbit ref orientation.
  10. If the approach velocity vector is pointing away from the planet:
    • Press F3 for automatic approach to targ orientation.
    • Use slight thrust to restore correct approach velocity vector.
  11. If the approach velocity vector is pointing towards the planet:
    • Press F4 for automatic depart from ref orientation.
    • Use slight thrust to restore correct approach velocity vector.
  12. Press F2 to restore automatic ccw orbit ref orientation.
  13. If Vhab-ref is less than Vo ref, use positive thrust to increase Vhab-ref.
    • If Vhab-ref is more than Vo ref, use reverse thrust to decrease Vhab-ref.
  14. Stop engines.
Retrieved from "http://wiki.spacesim.org/index.php?title=Planetary_Launch_Procedures&oldid=11226"